PRODUCTS CENTER
morocco Water Cooled 5Kw Hydrogen Cell System
Category:
Product Description
Water Cooled 5Kw Hydrogen Cell System
The internal composition of water-cooled fuel cell system is much more complex than that of air-cooled fuel cell system, but the product performance is also better, the operation is more stable, and the service life is longer.
The power of water-cooled fuel cells is usually greater than 5kw, but Rubri also provides hydrogen fuel cell systems less than 5kw, which is one of the few suppliers that can provide low-power water-cooled systems.
Product features:
1. Zero pollution
2. Wide range of applications
3. Efficiency: About 60%
4. Low maintenance cost

2.Product parameters
|
Power Rating |
5KW |
|
OPERATION |
|
|
Voltage Adjustable |
43.2 to 57.6 Vdc |
|
Voltage ripple |
±1V |
|
Altitude De-rating |
3.5% per 500m over 1,000m |
|
Temperature De-rating |
1.25% per °C over 40°C |
|
Standby Power Consumption |
Approximately<3% at peak power (DC) |
|
Reactants |
Hydrogen and Air |
|
Cooling |
Air (integrated cooling fan) |
|
H2 inlet pressure |
0.55-0.75bar |
|
Hydrogen purity |
≧99.995﹪ dry H2 |
|
Consumption |
≦0.78 Nm3/kWh (Average at max. load) |
|
Start up time |
≦2minute at ambient temperature |
|
Start up time |
≦2minute at ambient temperature |
|
Efficiency of stack |
≧42% at peak power |
|
Max noise |
Normal operation: <70 dBa at 1.5 meters |
|
ENVIRONMENT CONDITION |
|
|
Ambient temperature |
-10°C to + 45°C Standard (winter kit needed when temperature is below 0°C,during operation) |
|
Recommended cold start temp |
Above 5° C |
|
Relative Humidity |
0‐95% Non‐Condensing |
|
Storage Temperature |
﹣20°C to + 50°C Standard |
|
COMMUNICATION |
|
|
Communications |
RS485 or RS232 |
For reference only, the actual parameters shall be subject to the actual products.
3. Applications
- Back-up power system
- Hydrogen bicycle/ scooter
- Hydrogen fuel cell UAV
- Hydrogen fuel cell vehicle
- Hydrogen energy teaching aids
- Case display