Fixed Methanol Reforming Fuel Cell System

Category:

Methanol Reforming Fuel Cell

E-mail:

info@hfch.cn

Messages

Product Details

Fixed methanol reforming fuel cell system

The fixed methanol reforming fuel cell system is a new fuel cell system that takes clean fuel methanol as raw material and converts it into electric energy through electrochemical reaction. It has built-in methanol hydrogen production and purification module, battery management module and stack module. Through the visual operation interface, it can realize the functions of intelligent power supply, remote monitoring and so on.

1.Product parameters

Index	Parameter
Rated output	0-5kw@20℃,101.3KPa
Rated voltage	DC48V
Rated current	104.2A@48V
Size	6008001500mm
Protection grade	lp54
Total weight	About 300kg(Including DC/DC,5KW lithium battery)
Cold start time	≤35min@20℃，100% output power
Hot start time	≤10min@20℃，100% output power
Standby power	≤150w
Methanol grade	99.85 purity, meeting IMPCA requirements
Water quality requirements	ASTM type II deionized water
Fuel type	54% methanol and 46% deionized water
Fuel consumption	Methanol water 1L/KWH
Working temperature	-20℃~45℃(Low temperature need optional heater)
Relative humidity	0 ~ 95% no condensation
Altitude	≤3000m
Discharge system	H₂O, CO₂ / H₂ by-product, to be discharged
Noise	≤60dB@7m
Communication Protocol	RS485,optional TCP/IP,Canopen

*The parameters in the table are for customer reference, and the actual parameters are subject to the product.

2. Product features

It can provide long-term power without being limited by power grid, region and time; Electrical efficiency up to 45%
The calorific value of each liter of fuel is only 0.31 times that of gasoline, which is safer
The emissions are only CO2 and H2O, which is 80% lower than that of gasoline and diesel engines; No NOx, Sox and other pollutants are discharged
Expandable stack